18
3. Management with Web browser software
3.1 Confi guring and controlling the projector via a web browser (continued)
3.1.5 Mail Settings
Displays and confi gures e-mail addressing settings.
Item Description
Send mail
Click [Enable] check box to use the e-mail function.
Confi gure the conditions for sending e-mail under the Alert
Settings.
SMTP Server Address
Confi gures the address of the mail server in IP format.
• The address allows not only IP address but also domain
name if the valid DNS server is setup in the Network
Settings . The maximum length of host or domain name is up
to 255 characters.
Sender E-mail address
Confi gures the sender e-mail address.
The length of the sender e-mail address can be up to 255
alphanumeric characters.
Recipient E-mail address
Confi gures the e-mail address of up to fi ve recipients. You
can also specify [TO] or [CC] for each address. The length of
the recipient e-mail address can be up to 255 alphanumeric
characters.
Click [Apply] button to save the settings.
• You can confi rm whether the mail settings work correctly using [Send
Test Mail] button. Please enable Send mail setting before clicking [Send Test
Mail] .
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses.
NOTE
To Next Page
Loading...
