17
3. Management with Web browser software
3.1 Confi guring and controlling the projector via a web browser (continued)
Item Description
SNMP Port Confi gures the SNMP port.
Port open Click the [Enable] check box to use SNMP.
Trap address
Confi gures the destination of the SNMP Trap in IP format.
• The address allows not only IP address but also domain
name if the valid DNS server is setup in the Network
Settings . The maximum length of host or domain name is up
to 255 characters.
SMTP Port Confi gures the SMTP port.
Port open Click the [Enable] check box to use the e-mail function.
Network Bridge Port Confi gures the Bridge port number.
Port Number
Input the port number. Any number between 1024 and 65535
can be set up. It is set to 9717 as the default setting.
Daisy Chain Port Confi gures the Daisy Chain port number.
Port Number
Input the port number. Any number between 1024 and 65535
can be set up. It is set to 9718 as the default setting.
Click [Apply] button to save the settings.
• The new confi guration settings are activated after restarting the
network connection. When the confi guration settings are changed, you must
restart the network connection. You can restart the network connection by
clicking [Network Restart] on the main menu.
NOTE
To Next Page
Loading...
