Hitachi CP-X2520 - Page 45

45
CP-X2520 ( M2-25ED ) / CP-X3020 ( M2-30ED )
Flexible cables of LCD panel
1. Remove screws from MAIN board and rear panel.
Remove this screw if it is remained.
T2.6x12 screw (1pc) M2.6x8 screw (1pc)
M4x8 screw (2pcs)
 Dettaching the MAIN board or INPUT board.
 Optical unit
Detaching the LCD PRISM assembly or whole the optical unit
Remove tree screws shown in the picture.
M2.6 screws (3pcs) for LCD
PRISM assembly
T2.6
[ screw (3pcs)
for the optical unit.
Pinch the projections tightly and lift up the
LCD PRISM assembly carefully when
removing Iit. Pay attention not to let to the
LCD PRISM assembly touch any other parts
Do not swing the
screwdriver while you
loosen/tighten these
screws. Otherwise,
the I/O metal will
change.