53
The MIU (Multi Information processing Unit) is a function to
support the Network features and PC-LESS Presentation.
Remember that incorrect network settings on this projector
may cause trouble on the network. Be sure to consult with
your network administrator before connecting to an existing
access point on your network.
Select “MIU” from the main menu to access the following
functions.
Select an item using the ▲/▼ cursor buttons on the projector or remote control,
and press the ► cursor button on the projector or remote control, or ENTER
button on the remote control to execute the item. Then perform it according to the
following table.
See the User’s Manual - Network Guide for details of MIU operation.
MIU menu
(continued on next page)
MIU menu
• The factory default setting for DHCP is OFF. If your network has
DHCP enabled, and needs to set IP ADDRESS, SUBNET MASK and DEFAULT
GATEWAY automatically, please set DHCP to ON. ( Network Settings of
the User’s Manual - Network Guide)
• If you are not utilizing SNTP ( Date/Time Settings of the User’s Manual
- Network Guide), then you must set the DATE AND TIME (57) during the
initial installation.
NOTE
Item Description
LIVE MODE
Selecting this item sets the projector onto the “Live Mode”.
On the “Live Mode”, the projector displays the images from the PC
via Network, supported by “MIU Live Viewer”. (
Live Mode of the
User’s Manual - Network Guide)
In the Live Mode, the message “Waiting for connection” will be
displayed until the “MIU Live Viewer” start to send computer screen
image.
LIVE MODE
SETTING
Selecting this item displays the LIVE MODE
SETTING menu.
Use the ▲/▼ buttons to select an item, and
the ► or ENTER button to perform the item.
To Next Page
Loading...
