62
MIU menu
MIU menu (continued)
Item Description
INFORMATION
Selecting this item displays the MIU-INFORMATION- dialog for
conrming the network settings.
• The PROJECTOR NAME is displayed.
• Nothing (blank) is shown in the “PROJECTOR NAME” and “SSID”
field until you setup those items. (
58, 59, 60)
• When the voltage level of the battery for the built in clock
decreases, the set time may become incorrect even though
accurate date and time are input. Replace the battery suitably.
(
68)
• MAC wireless will not be displayed when the NETWORK MODE is
set to the WIRED even if the wireless network card is mounted.
• IP ADDRESS, SUBNET MASK and DEFAULT GATEWAY indicate
“0.0.0.0” in the following condition.
(1) The NETWORK MODE is set to the WIRELESS and the
wireless network card is not mounted.
(2) DHCP is ON and the projector does not get address from DHCP
server.
• Nothing (blank) is shown in the “CH”, “SPEED” and “MAC
WIRELESS” field in case of either no wireless network card is
inserted or “WIRED” mode is selected at NETWORK MODE, or
both.
• The actual performance and setting will be shown in the “CH ” and
“SPEED” field, instead of the setting value in the SETUP menu.
SERVICE
MIU RESTART
Use the ▲ button to restart the network communication. The
network communication will be cut off once and restarted.
EXECUTE
CANCEL
• After selecting the EXECUTE, the MIU menu may not be
controlled approximately 20 seconds.
• If DHCP is ON, IP address may be changed.
To Next Page
Loading...
Need help?
General
