Hitachi CP-X440 - PICTURE Menu

25
Multifunctional settings
PICTURE Menu
Item
Description
BRIGHTNESS
Using the buttons ▲/▼ adjusts the brightness.
: Light

Dark
CONTRAST
Using the buttons ▲/▼ adjusts the contrast.
:
Strong

Weak
GAMMA
Using the butt
ons ▲/▼ switches the
GAMMA mode.
#1 DEFAULT

#1 CUSTOM

#2 DEFAULT
#3 CUSTOM

#3 DEFAULT

#
2
CUSTOM
To adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOM
Selecting
a mode of CUSTOM
and then
pressing the button ►
or the ENTER button
displays a dialog to aid you in adjusting the
mode.
This function is useful when you want to
change the brightness of particular tones
.
Choose
an item
using the buttons ◄/►, and
adjust the level using the buttons ▲/▼.
Y
ou can display a test pattern for checking the effect of your
You can display a test pattern for checking the effect of your Y
adjustment by pressing the ENTER button
.
Each time you press the ENTER button, the pattern changes as
below.
No pattern

Gray scale of 9 steps
Ramp

Gray scale of 15 steps
The eight equalizing bars correspond to eight tone levels of the
test pattern except the darkest in the left end. If you want to adjust
the 2nd tone from left end on the test pattern, use the equalizing
adjustment bar “1”. The darkest tone at the left end of the test
pattern cannot be controlled with any of equalizing adjustment bar.
•
When this fun
ction is performed, a certain extra such as a line
may appear
.
With the PICTURE menu, the items shown in the table
below can be performed.
Select an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button
on the remote control to execute the item. Then perform it
referring to the following table.
Ramp
1
+0
2
+0
3
+0
4
+0
5
+0
6
+0
7
+0
8
+0
GAMMA
[
CUSTOM 1
]
ENTER :
MENU [RGB]
IMAGE
SETUP
PICTURE
INPUT
OPTION
SCREEN
SHARPNESS +0
BRIGHTNESS ＋0
CONTRAST ＋0
COLOR +0
TINT +0
COLOR TEMP 6500K
GAMMA DEFAULT 1
MY MEMORY SAVE 1
:SELECT
EASY MENU
PROGRESSIVE TURN OFF