Hitachi CP-X440 - SCREEN Menu

33
Multifunctional settings
SCREEN Menu
Item
Description
LANGUAGE
Using the buttons ▲/▼ switches the
OSD (On Screen Display)
language
.
SUOMI

POLSKI

TÜRKÇE
ENGLISH

FRANÇAIS

DEUTSCH

ESP
AÑOL
ESPAÑOL ESP

I
TA
LIAN
O
NORSK

NEDERLANDS

POR
TUGUÊS

日本語



SVENSKA

日本語
MENU POSITION
Using the buttons ◄/►/▲/▼ adjusts the
menu position
.
To quit the operation, press the MENU button on the remote control
or keep no operation for 10 seconds.
OSD BRIGHT.
Using the buttons ▲/▼ switches the
brightness level of the OSD (On
Screen Display)
.
BRIGHT

DARK
BLANK
Using the buttons ▲/▼ switches the
mode for the blank scree
n
.
The blank screen is a screen
for the temporarily blanking feature
(

21
)
.
It is displayed by pressing the BLANK button on the remote
control
.
MyScreen

ORIGINAL

BLUE

WHITE

BLACK
MyScreen is a screen you can register as a desired screen. The
ORIGINAL screen is the existing standard screen.
BLUE, WHITE
and BLACK are non-patterned (plain) screens in each color.
•
To avoid remaining as an afterimage, the MyScreen and the
ORIGINAL screens will change to the BLACK screen after several
minutes.
•
For the MyScreen, please refer to the MyScreen
item
(


34
).
With the SCREEN menu, the items shown in the table
below can be performed.
Select an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button
on the remote control to execute the item. Then perform it
referring to the following table.
MENU [RGB]
IMAGE
SETUP
PICTURE
INPUT
OPTION
EASY MENU
SCREEN
:SELECT
LANGUAGE ENGLISH
MENU POSITION
START UP ORIGINAL
OSD BRIGHT. 5
MyScreen
MyScreen Lock TURN OFF
MESSAGE TURN ON
BLANK BLACK