Hitachi CP-X440 - Page 37

37
Multifunctional settings
Item
Description
SERVICE
Selecting this item displays
the
SERVICE menu
.
Select an item using the buttons ▲/▼, and press the button ► or
the ENTER button on the remote control to
execute the item
.
FAN SPEED

AUTO ADJUST

GHOST

KEY LOCK

FILTER MESSAG

FACTORY RES
ET
FAN SPEED
Using the buttons ▲/▼ switches the
r
otation speed of the cooling
fans. The HIGH is the mode for use at highlands etc.
Note that the
projector is noisier when the HIGH is selected.
HIGH

NORMAL
AUTO ADJUST
Using
the buttons ▲/▼
enables
/disables
the
automatic adjustment
.
When DISABLE is selected, the automatic adjustment feature is
disabled, although rough adjustment is automatically performed
depending on the basic setting.
ENABLE

DISABLE
•
Depending on conditions, such as input image, signal cable to the
projector, environment around the projector, etc., the automatic adjustment
may not work correctly. In such a case, please choose DISABLE to
disable the automatic adjustment, and make adjustment manually.
GHOST
1. Select a color element of ghost using the buttons
◄/►
.
2.
Adjust the selected element using the buttons ▲/▼ to disappear ghost.
2. Adjust the selected element using the buttons ▲/▼ to disappear ghost. 2.
KEY LOCK
Using the buttons
▲/▼
turns on/off the key lock feature. When TURN ON is
selected, the buttons on the projector except the STANDBY/ON button are locked.
TURN ON

TURN OFF
•
Please use to avoid a mischief and touching accidentally. This
function does not have any effect on the remote control.
FILTER MESSAGE
Use the ▲/▼ button to set the timer for the interval to show the
message for cleaning up the air fi lter.
100h

200h

300h

TURN OFF

50h
After selecting “50h”, 100h”, “200h”, or “300” , the message “CLEAN
THE AIR FILTER” will appear after the timer reaches the interval
time set by the menu. Please refer to the “FILTER TIME” item
(


36
)
and the table “Related message”
(

42
)
When the “TURN OFF” is chosen, the air-fi lter cleaning message will not appear.
•
Please check and clean the air fi lter periodically, even if there is
no message. If the air fi lter becomes blocked by dust or others, the
internal temperature will rise, which could cause malfunction, or
reduce the lifetime of the projector.
•
It is recommended to choose “100h” in general. Please be careful
with the operating environment of the projector and the condition of air
fi lter, especially when the “200h”, “300h” or “TURN OFF” is chosen.
FACTORY RESET
Selecting RESET using the button ▲ performs this function.
By this function
,
all the items in all of menus will collectively return to the
initial setting
. N
ote
that the items LAMP TIME, FILTER TIME and LANGUAGE are not reset.
RESET

CANCEL
OPTION Menu (continued)