Hitachi CP-X8170 User Manual

119
Troubleshooting
Message Description
A note of precaution when cleaning the air lter.
Please immediately turn the power off, and clean or
change the air lter referring to the Cleaning and
replacing the air lter section of this manual. After you
have cleaned or changed the air lter, please be sure to
reset the lter timer (

70, 114).
The button operation is not available.
Check the button you are going to use (

6). Even when
a usable button is pressed, all button operations are not
available under the following conditions.
- While the lens is moving, button operation from the
control panel or the remote control might be ignored.
- Pressing the one of buttons to call a signal input might
be ignored, when all the input ports belonging to the
category the button's name shows are set to the "SKIP"
by the item SOURCE SKIP of the OPTION menu.
Related messages (continued)

Hitachi CP-X8170 Specifications

General

Brand	Hitachi
Model	CP-X8170
Category	Projector
Language	English