Hitachi DF2200 - Menus

25
Menus
This TV set contains different settings menus where you can program your
preferred settings. Once you have programmed any settings, the unit will
retain them in its memory until you change them, even when switching the
unit to standby mode. This means you can always operate the system under
the same conditions.
Menu navigation
sPress the MENU button on the bottom of the front panel, or on the remote
control, to display the main menu.
sPress the / buttons to select different submenus.
sPress OK or to enter the submenu page.
sPress the / buttons to select the preferred option.
sPress the / buttons to adjust the value.
sPress the MENU button to return to the previous menu page.
sPress the EXIT button to exit the menu page.
There are menus for television operation in DTV and ATV mode (pages 25-34),
for PC mode (page 35) and for DVD mode (pages 46-47).
sPress the SOURCE button on the bottom of the front panel, or on the
remote control, to display the input source list.
sPress the / buttons to select the desired input source from the options
available.
NOTE: When you switch on this TV for the first time, you need to select the
language and the country to auto-search for all the available channels
in your area. See page 14 for first time installation instructions.