49
FAQs
General problems with the unit
Problem Solution
No power. Insert the power plug securely into the power outlet.
No picture. Ensure that the equipment is connected properly.
No sound or
distorted sound.
sEnsure that the equipment is connected properly.
sEnsure that the input setting for the TV is correct.
sAdjust the volume to a suitable level by pressing
the VOL+/VOL- button.
No operations can be
performed with the
remote control unit.
sCheck the batteries are installed with the correct
polarities.
sThe batteries may be exhausted: replace them with
new ones.
sMake sure to point the remote control at the
remote control sensor and try it again.
sMake sure to use the remote control at a distance
of no more than 6m from the remote control
sensor.
sRemove any obstacles between the remote control
and remote control sensor.
No key operation (by
the main unit and/or
the remote control) is
effective
Disconnect the power cord and then reconnect it.
(The player may not be operating properly due to
lightning, static electricity or some other factors.)
If you experience any problems with your TV, check the list below and take
any necessary steps before calling for service. If none of the solutions help
you solve the problem, turn the power off and contact the after sales support
line for advice.