English
105
PLAYING BACK WIDE-MODE IMAGES ON 4:3 DISPLAY TV (TV type)
If you connect the DVD video camera/recorder with a disc recorded in wide mode to a TV with 4:3
display only and play it back, vertically long images will appear. You can specify “TV type: 4:3” to
display 4:3 images on the TV.
1Press the DISC NAVIGATION button.
2Press the MENU button.
3Use the 2/1/0/// buttons to
choose “TV type” on the “Others” menu
screen, and then press the button.
4Choose “4:3”, and then press the button.
SLIDE SHOW (CONTINUOUS PLAYBACK OF STILLS)
If you play back stills recorded on a card, the DVD video camera/recorder will enter the playback
pause status after each still is played back.
Setting Slide Show allows you to continuously play back stills.
1Press the DISC NAVIGATION button.
2Press the MENU button.
3Use the 2/1/0/// buttons to
choose “Slide Show”, “Start”, and then press
the button.
When playback is finished, the DVD video
camera/recorder will enter the playback
pause status at the final still.
Pressing the button will restore the Disc
Navigation screen.
Note:
• With slide show, playback will start from the first photo
on card regardless of the position of cursor or
whether you attempt to select scenes.
• If you press the button or turn the DVD video
camera/recorder off, Slide Show will be cancelled.
Start: To start a slide show
To Next Page
Loading...
