English
89
Programme
WHAT IS “PROGRAMME”?
Programme refers to an assembly of scenes recorded on the same date regardless of whether they are
movie or still.
SWITCHING TO THUMBNAIL DISPLAY OF SPECIFIC DATE (SELECT)
Since the scenes recorded on this DVD video camera/recorder are collected as “programmes” for
each recording date, selecting a programme will allow you to display only the scenes on a specific
date.
1Press the DISC NAVIGATION button.
2Press the MENU button.
3Use the 2/1/0/// buttons to
choose “Select” on the “Program” menu
screen, and then press the button.
4Select the programme
to be displayed, and
then press the
button.
The Disc Navigation
screen of the selected
programme will
appear.
Note:
• Pressing the button on the “Select Program” screen
will restore the Disc Navigation screen.
• If a disc recorded on another device is loaded in this
DVD video camera/recorder, the programme may not
be a collection of recordings on the same date.
• If you change the video quality or switch the wide
mode with a +RW, multiple programmes will be
produced even if they are recorded on the same date.
Scene No. 1 Scene No. 2 Scene No. 3 Scene No. 4 Scene No. 5 Scene No. 6
Select Progra
m
01 30/ 8/2006
02 10/ 9/2006
A l l Progr a
m
s
ENTER RETURN
03 30/ 9/2006
001/00803 30/ 9/2006
PLAY
To Next Page
Loading...
