EasyManua.ls Logo

Hitachi E10U - Applications; Preparation before Operation; Specifications; Transporting; Storage

Hitachi E10U
125 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
English
SPECIFICATIONS
Item
Name
E10U
Model
Rotating multi-pole field magnet type single-phase AC inverter generator
Excitation method
Self excitation
Voltage regulation method
Inverter method
Rated frequency
50Hz
Max. output
1050VA
Rated output
950VA
Rated voltage
230V
Power factor
1.0
Rated output
100W
Rated voltage
12V
Rated current
8.3A
Alternating current
Grounded outlets
Direct current
Terminal
AC/DC overcurrent protector
Circuit protector
Name
GM82P
Type
Air-cooled 4-cycle OHV gasoline engine
Total displacement
80cm
3
(4.9 cu in)
Max. output
1.8kW (2.4PS)
Fuel
Non-leaded gasoline for automobiles
Fuel tank capacity (red level)
3.8L
Rated continuous operation hours (red level)
About 5 hours
Lubricant
API classification class SE or better (10W-30)
Lubricant capacity
0.4L
Ignition method Transistor type magnet ignition
Starting method
Recoil method
Dimensions (overall length X overall
width X overall height)
400
×
330
×
390mm
Dry weight 20kg
GeneratorEngine
Others
TRANSPORTING / STORAGE
Transporting
CAUTION: Units are heavy. Observe safe lifting procedures when transporting.
Before transporting generator, it is important to turn off the engine switch. Keep generator
level at all times to prevent fuel spillage. Fuel vapor or spilled fuel may ignite.
WARNING: Contact with a hot engine or exhaust system can cause serious burns or fires.
Let the engine and muffler cool before transporting the generator.
Storage
Make sure that the generator storage area is free of excessive humidity and dust. Store the generator in dry,
wellventilated area.
WARNING: Contact with a hot engine or exhaust system can cause serious burns or fires.
Let the engine and muffler cool before storing the generator.
APPLICATIONS
Power source of electric appliances and tools.
PREPARATION BEFORE OPERATION
Before starting the generator, check the oil and fuel levels. Be sure that the air cleaner is functioning. Follow the
guidelines below when adding oil and fuel.
Alternating current
Direct
current
Output
terminal
Specifications are subject to change without notice.

Table of Contents

Related product manuals