Easy To Use
Drive Lights
The red circle on the front of the drive tells you about the drive’s status.
• Red Circle On: Drive is ready.
• Red Circle Spinning: Drive is in use.
Back-Up Software
Easy-to-use back-up software comes pre-installed on your new drive. Before
you back up, you’ll need to install a copy of this software onto your PC.
1. First, open your new hard drive by double-clicking “Easy Drive” in the
“My Computer” window (on a Windows PC) or on your desktop (on a Mac).
2. Double-click the TotalMedia Backup
™
folder in the main directory of your
new drive.
3. Double-click the folder that corresponds to your computer (PC or Mac).
4. Double-click the “Setup” application (on a Windows PC) or the
“Installer” icon (on a Mac). Follow the on-screen instructions to install
“ArcSoft TotalMedia Backup” onto your PC.
5. You will need to reboot your computer before you can use the new
back-up software.
To Next Page
Loading...
