Storage system specifications
The following table lists the technical specifications of the storage system.
Note: The current and power specifications of the storage system in the
following tables were measured in a controlled environment. To calculate the
power and current draw, and heat output of a specific system, see
Component weight, heat, airflow, and power consumption on page 84 or use
the Power and Weight calculator at the following URL.
http://www.hds.com/go/weight-and-power-calculator/
If you need assistance using this tool, contact Hitachi Data Systems Support
at
https://support.hds.com/en_us/contact-us.html.
Table 24 VSP G1000 and G1500 System Specifications
Item
Specification
System Number of drives Minimum 4 (disk-in model) / 0 (diskless
model)
Maximum 2,304 (SFF HDD) / 1,152 (LFF HDD)
Maximum number of flash drives 384
*6
Maximum number of flash module drives 576
RAID level RAID 6/RAID 5/RAID 1
RAID Group
Configuration
RAID 6
6D+2P, 14D+2P
RAID 5
3D+1P, 7D+1P
RAID 1
2D+2D, 4D+4D
Maximum number of spare drives 96
*1
Maximum number of volumes 65,280
Maximum storage system capacity
(physical capacity)
• 3,984 TB (1.8 TB, 2.5-inch HDD
used)
• 6,767 TB (6 TB, 3.5-inch HDD
used)
• 8,106TB (14TB FMD used)
Internal Path Architecture Hierarchical Star Net
Maximum
bandwidth
Data path 768 GBps
Control path 128 GBps
Memory Cache memory capacity 32 GB to 2,048 GB
Cache flash memory capacity 256 GB to 2,048 GB
Device I/F DKC-DKU Interface SAS/Dual Port
Data Transfer Rate Max. 6 Gbps
122 Specifications
Hitachi Virtual Storage Platform G1000, G1500, and Virtual Storage Platform F1500 Hardware Guide
To Next Page
Loading...
