Item Description Dimension (L x W x H) Weight (lb)
Requires 8U of contiguous
space in rack
317 lb (144 kg)
(fully loaded)
4
SFF drive tray
Supports a maximum of 192
drives.
21.1 in (538 mm) x 19 in (483
mm) x 3.45 in (88 mm)
2U of space in drive chassis
39 lb (18 kg)
(empty)
55 lb (25 kg) (fully
loaded)
LFF drive tray
Supports a maximum of 96
drives.
38 lb (17 kg)
(empty)
57 lb (26 kg) (fully
loaded)
FMD drive tray
Supports a maximum of 48
drives.
42 lb (19 kg)
(empty)
79 lb (36 kg) (fully
loaded)
Table 16 VSP G1000, VSP G1500, and VSP F1500 storage system
dimensions
Number of racks Width (in / mm) Depth (in / mm) Height (in / mm)
1 23.5 / 600 47.25 / 1200 79.1 / 2010
2 47 / 1200 47.25 / 1200 79.1 / 2010
3 117.5 / 3000 47.25 / 1200 79.1 / 2010
4 94 / 2400 47.25 / 1200 79.1 / 2010
5 117.5 / 3000 47.25 / 1200 79.1 / 2010
6 141.0 / 3600 47.25 / 1200 79.1 / 2010
Electrical specifications
Note: The current and power specifications in the following tables were
measured on the following VSP G1000, VSP G1500, and VSP F1500 storage
systems in a controlled environment. To calculate the power draw, current
draw, and heat output of a specific system, see Component weight, heat,
airflow, and power consumption on page 84 or (easier) use the Power and
Weight calculator at the following URL.
http://www.hds.com/go/weight-and-power-calculator/
Contact technical support if you need assistance using this tool.
The following table lists the electric power requirements of a standard VSP
G1000, VSP G1500, and VSP F1500 storage systems. Detailed electrical
specifications are listed in
Specifications on page 121. For detailed voltage
and power requirements, see Electrical specifications on page 127. For
Site preparation 81
Hitachi Virtual Storage Platform G1000, G1500, and Virtual Storage Platform F1500 Hardware Guide
To Next Page
Loading...
