Mechanical specifications
The following tables list the mechanical specifications of the storage system.
Table 27 Mechanical specifications
Dimension Single Rack
Single Controller
(3 racks)
Dual Controller
(6 racks)
Width (inches / mm) 21.6 / 600 70.9 / 1,800 141.7 / 3,600
Depth (inches / mm) 47.2 / 1,200 47.2 / 1,200 47.2 / 1,200
Height (inches / mm) 79.1 / 2,010 79.1 / 2,010 79.1 / 2,010
System Weight Single Rack
Single Controller
(3 racks)
Dual Controller
(6 racks)
(lbs / kg) Diskless
1 controller 638 / 290
2 controllers 983 / 446
- -
Maximum (lbs / kg) 1,301 / 591
384 SFF drives
3,214 / 1,461
1,152 SFF drives
6,418 /2,917
2,304 SFF drives
Maximum (lbs / kg) 1,268 / 578
192 LFF drives
3,181 / 1,446
576 LFF drives
6,362 / 2,892
1,152 LFF drives
Electrical specifications
The VSP G1000, VSP G1500, and VSP F1500 storage system PDUs support
both single-phase or three-phase AC power. The system components use
single phase 220 VAC.
Table 28 Input power specifications
Item
Input Power to
PDUs
Input
Current
1
Steady
Current
2
Leakage
Current
Inrush Current
1st (0-
p)
2nd (0-
p)
1st (0-p)
Time
(-25%)
DKC PS AC, single phase
2 pole + ground
200 V -8% min
240 V +6% max
3
7.18A 3.59A 0.28 mA 20A 15A 80ms
UBX PS 2.07A 1.04A 1.75mA 25A 20A 150ms
SBX PS 2.61A 1.31A 1.75mA 25A 20A 150ms
FBX PS 0.28A 1.42A 28mA 20A 10A 80ms
Notes:
1. The maximum current in case AC input is not a redundant configuration (in case of 184V
[200V -8%]).
Specifications 127
Hitachi Virtual Storage Platform G1000, G1500, and Virtual Storage Platform F1500 Hardware Guide
To Next Page
Loading...
