Hitachi G1000 - Component Weight, Heat, Airflow, and Power Consumption

Item Operating
1
Not Operating
2
Shipping & Storage
3
Notes:
1. Environmental specification for operation should be met before the storage system is powered on. Maximum
temperature of 90°F / 32°C should be strictly met at air system air inlet.
2. Non-operating condition includes both packing and unpacking conditions unless otherwise specified.
3. The system and components should be packed in factory packing for shipping and storing.
4. No condensation in and around the drive should be observed under any conditions.
5. The vibration specifications are applied to all three axes.
6. See ASTM D999-01 The Methods for Vibration Testing of Shipping Containers.
7. See ASTM D4728-01 Test Method for Random Vibration Testing of Shipping Containers.
8. See ASTM D5277-92 Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact
Tester.
9. See ASTM D6055-96 Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and
Crates.
10. When FMDs (DKC-F810I-1R6FM/3R2FM) are installed.
Component weight, heat, airflow, and power consumption
The following table provides physical specifications of the individual VSP
G1000, VSP G1500, and VSP F1500 system components.
Component Name Component Model No.
Weight
(lb/Kg)
Power
Consumption
(VA)
Heat
Output
Airflow
(m
3
/min)
Primary controller DKC810I-CBXA
DKC810I-CBXAC
4
DKC810I-CBXE
4
312 /142 508
1
483
1
16.7(32°C)
25.9(40°C)
Secondary controller DKC-F810I-CBXB
DKC-F810I-CBXF
308 / 140 435
1
413
1
16.7(32°C)
25.9(40°C)
SFF drive chassis DKC-F810I-SBX
DKC-F810I-SBXC
4
315 / 143 674
1
640
1
9.4(32°C)
11.4(40°C)
LFF drive chassis DKC-F810I-UBX
DKC-F810I-UBXC
4
299 / 136 674
1
640
1
6.2(32°C)
8.3(40°C)
FMD drive chassis DKC-F810I-FBX 169 / 77 640
1
600
1
8.4
Service Processor DKC-F810I-SVP
DKC-F810I-SVPC
4
8.8 / 4.0 75 Included in controller
chassis specs
Hub DKC-F810I-HUB 5.1 / 2.3 10
Virtual storage director pair
(processor blades)
DKC-F810I-MP
DKC-F810I-MP2
DKC-F810I-MP2UGH
6.0 / 2.7 179
Cache path control adapter DKC-F810I-CPEX 6.2 / 2.8 80
Cache module (16GB) DKC-F810I-CM16G 0.022 4
Cache module (32GB) DKC-F810I-CM32G 0.054 7
84 Site preparation
Hitachi Virtual Storage Platform G1000, G1500, and Virtual Storage Platform F1500 Hardware Guide