Item Specification
FCoE/iSCSI 10 Gbps
Maximum number of CHA 12
Power AC Input Single Phase 60Hz : 200V to 240V
50Hz : 200V to 240V
Acoustic Level
*4
Operating CBXE/CBXF 58dB (24°C or less), 60dB (32°C),
70dB (40°C)
FBX 61dB (24°C or less), 64dB (32°C),
70dB (40°C)
Standby
*5
CBXE/CBXF 58dB (24°C or less), 60dB (32°C),
70dB (40°C)
FBX 61dB (24°C or less), 64dB (32°C),
70dB (40°C)
Dimension W x D x H (mm) Single rack 610 x 1,115 x 2,006
Six racks 3,610 x 1,115 x 2,006
Non-stop
maintenance
Control PCB Support
Cache memory module Support
Cache flash memory Support
Power supply, fan Support
Microcode Support
Drive (HDD, SSD, FMD) Support
*1
Available as spare or data disks.
*2
By the replacing SFP transceiver of the fibre port on the CHA to the DKC-F810I-1PL8, the port
can be used for the long wavelength.
*3
By the replacing SFP transceiver of the fibre port on the CHA to the DKC-F810I-1PL16, the port
can be used for the long wavelength.
*4
Measurement Condition: The point 1m far from floor and surface of the product.
*5
Even if storage system is in a power-off state, the cooling fan continues to rotate in a standby
mode.
*6
For VSP F1500 with FMDs installed, a minimum of 8 FMDs (min. capacity of 49 TB) are required
for this specific configuration.
Drive specifications and guidelines
Table 26 Drive specifications
Drive Type
Size (inches)
1
Drive Capacity Speed (RPM) Transfer Rate (Gbps)
HDD (SAS) 3.5 4.0 TB, 6.0 TB
6
7,200 -
600 GB 10,000 -
2.5 300 GB, 600 GB 15,000 -
2.5 600 GB, 900 GB, 1.2 TB, 1.8
TB
10,000 -
Specifications 125
Hitachi Virtual Storage Platform G1000, G1500, and Virtual Storage Platform F1500 Hardware Guide
To Next Page
Loading...
