Number Item Description
1 2
ACT LED Green: Normal operation.
Blink: drive is being accessed.
Slow blink:
• DKC-F710I-1R6FM/3R2FM:
insufficient battery capacity
in the flash module drive.
• DKC-F810I-1R6FN/3R2FN/
6R4FN: flash module drive
built-in capacitor is charged.
If the storage system is
turned on, the LED stops
blinking when the capacitor
is charged completely
(about two minutes).
ALM LED Red: Drive stopped due to a
failure and can be replaced.
3
POWER, READY, LOCATE LEDs See the previous table.
4 Flash module drives
Twelve flash module drives.
Slots are designated the
following way:
9, 10, 11
6, 7, 8
3, 4, 5
0, 1, 2
FMD rear panel
Number
Item Description
1
ENC
N/A
Hardware description 41
Hitachi Virtual Storage Platform G800 Hardware Reference Guide