Number Item Description
2
POWER LED Green: ENC is in the power-on
state.
3
LOCATE LED Amber:
• This LED indicates the
location of the chassis.
• The LED can be lit or turned
off by the maintenance
utility.
4
ALARM LED Red: ENC can be replaced.
5
PATH (IN) LED Blue: IN side port is linked up.
6
PATH (IN) connector Connect to a controller or drive
tray.
7
PATH (OUT)LED Blue: OUT side port is linked
up.
8
PATH (OUT) connector Connect to a drive tray.
9
Console This port is reserved.
10
Receptacle Connect to the power cable
supplied with the storage
system.
11 Three LEDS, top to bottom:
RDY LED Green: power supply unit is
operating normally.
AC IN LED Green: power supply unit is
operating normally.
ALM REPLACE LED Red: power supply unit can be
replaced.
Dense intermix drive tray
Dense intermix drive tray with front panel bezel
42 Hardware description
Hitachi Virtual Storage Platform G800 Hardware Reference Guide
To Next Page
Loading...
