Hitachi Virtual Storage Platform SVP server
The following sections describe the physical SVP. A virtual SVP is also
available.
Service processor description
VSP Gx00 models include a separate, dedicated 1U service processor (SVP)
to host an element manager (Hitachi Device Manager - Storage Navigator).
The SVP (model number 3919435.P) operates independently from the
storage system's CPU and operating system, and provides out‑of‑band
configuration and management of the storage system. It also collects
performance data for key components of the storage system to enable
diagnostic testing and analysis.
Note: This product is also designed for IT power distribution systems with
phase-to-phase voltage.
The SVP runs Microsoft Windows Embedded Standard 7. This operating
system provides the same look and feel and desktop environment as
Microsoft Windows 7 Professional.
The SVP provides four RJ-45 ports:
• Two ports connect to the storage system controllers (one port for each
controller).
• One port connects to the user's IP network.
• One port connects to a user-supplied management console PC.
Three of the four RJ-45 ports (the ones that connect to the controllers and
the IP network) are configured as a bridge. The SVP can be addressed using
the default IP address 192.168.0.15.
In the unlikely event you cannot connect to the SVP using the default IP
address, use the following emergency login: http://<default SVP IP
address>/dev/storage/<model number><system serial number>/
emergency.do. For example:
Storage system model
number
Storage system serial
number
URL
8320004 456789 http://192.168.0.15/dev/
storage/8320004456789/
emergency.do
8340004 456789 http://192.168.0.15/dev/
storage/8340004456789/
emergency.do
50 Hardware description
Hitachi Virtual Storage Platform G800 Hardware Reference Guide
To Next Page
Loading...
