5K250 (SATA) OEM Specification
Page 93 of 171
Word Content Description
87 6163H Command set/feature enabled
15 (=0) Always
14 (=1) Always
13 (=1) 1=IDLE IMMEDIATE with UNLOAD FEATURE
supported
12- 9 (=0) Reserved
8 (=1) 1=64 bit World wide name supported
7 (=0) 1=WRITE DMA QUEUED FUA EXT command
supported
6 (=1) 1=WRITE DMA FUA EXT and WRITE MULTIPLE
FUA EXT command supported
5 (=1) 1=General Purpose Logging feature set supported
4- 2 (=0) Reserved
1 (=1) 1=SMART self-test supported
0 (=1) 1=SMART error logging supported
88 xx7FH Ultra DMA Transfer mode (mode 6 supported)
15 (=0) Reserved
14 (=x) 1=UltraDMA mode 6 is selected
13 (=x) 1=UltraDMA mode 5 is selected
12 (=x) 1=UltraDMA mode 4 is selected
11 (=x) 1=UltraDMA mode 3 is selected
10 (=x) 1=UltraDMA mode 2 is selected
9 (=x) 1=UltraDMA mode 1 is selected
8 (=x) 1=UltraDMA mode 0 is selected
7 (=0) Reserved
6 (=1) 1=UltraDMA mode 6 is supported
5 (=1) 1=UltraDMA mode 5 is supported
4 (=1) 1=UltraDMA mode 4 is supported
3 (=1) 1=UltraDMA mode 3 is supported
2 (=1) 1=UltraDMA mode 2 is supported
1 (=1) 1=UltraDMA mode 1 is supported
0 (=1) 1=UltraDMA mode 0 is supported
Note.1 The ‘*’ mark in ‘Content’ field indicates the use of those parameters that are vendor specific.
Table 60 Identify device information --- Continued ---
To Next Page
Loading...
