Hitachi HUS VM - Page 365

raidcom add ldev
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
Get Command
Status
Async 2E10 0101 The volumes cannot be added because the check
sum of the encryption key does not match.
Get Command
Status
Async 2E10 020E The specified LDEV is not in the status where the
capacity saving setting can be enabled.
Get Command
Status
Async 2E10 6014 The operation cannot be performed because the
specified pool status is incorrect.
Get Command
Status
Async 2E10 601B The free space in the specified pool is insufficient.
Get Command
Status
Async 2E10 601C Full Allocation cannot be performed because the
pool volume is being deleted.
Get Command
Status
Async 2E10 6020 The deduplication function cannot be used in the
specified pool.
Get Command
Status
Async 2E10 6021 The deduplication system data volume defined for
the specified pool is not in the normal status.
Get Command
Status
Async 2E10 6022 The operation cannot be performed because the
deduplication system data volume of the pool
linked with the specified LDEV is blocked.
Get Command
Status
Async 2E11 0003 An LDEV that is in the state of shredding is
included in the parity group of the target LDEV.
Get Command
Status
Async 2E11 0004 An LDEV that is in the state of formatting is
included in the parity group of the target LDEV.
Get Command
Status
Async 2E11 0005 An LDEV that is in the state of executing quick
format is included in the parity group of the target
LDEV.
Get Command
Status
Async 2E11 001B The specified LDEV is blocked.
CMDRJE Executing 2E11 0053 The specified LDEV is used in another operation.
CMDRJE Executing 2E11 0060 The operation failed because accelerated
compression of the parity group to which the
specified LDEV belongs is enabled.
Get Command
Status
Async 2E11 0102 The parity group of the target LDEV is in the state
of correction copy.
CMDRJE Executing 2E11 0153 The parity group or the external volume group that
the specified LDEV is belongs to is used in another
operation.
Get Command
Status
Async 2E11 0205 The operation cannot be performed because the
total capacity of provisioning virtual volumes and
deduplication system data volumes defined in the
specified pool exceeds the maximum of reserved
pool capacity.
Troubleshooting
9-41
Command Control Interface User and Reference Guide