raidcom add ldev
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
Get Command
Status
Async 2E11 0209 The operation cannot be performed due to a cache
memory failure or maintenance work being
performed.
Get Command
Status
Async 2E11 6007 The operation cannot be performed because the
specified pool volume is blocked.
Get Command
Status
Async 2E11 6008 The operation cannot be performed because the
pool linked with the specified LDEV is in the
unusable status.
Get Command
Status
Async 2E11 8004 The operation cannot be performed because the
internal processing is in progress.
CMDRJE Executing 2E11 8010 The storage system is in internal process, or the
configuration changing processes are conflicting.
Get Command
Status
Async 2E11 8105 Cache segment size is incorrect.
Get Command
Status
Async 2E11 8108 The operation cannot be performed because there
is blocked part in the system.
CMDRJE Executing 2E11 9400 The command cannot be accepted. After a while,
execute the same command.
CMDRJE Executing 2E20 0000 The specified LDEV is not defined.
CMDRJE
Get Command
Status
Executing/
Async
2E20 0007 The specified CLPR does not exist.
CMDRJE Executing 2E20 0100 There is no parity group.
CMDRJE
Get Command
Status
Executing/
Async
2E20 6000 Pool ID is invalid.
Get Command
Status
Async 2E20 8300 The specified MP Blade is not installed.
Get Command
Status
Async 2E21 6003 There is not enough free shared memory space.
Get Command
Status
Async 2E21 8103 The operation cannot be performed because the
capacity of shared memory is insufficient.
Get Command
Status
Async 2E21 810A The shared memory is not installed.
Get Command
Status
Async 2E21 8300 Package for Mainframe is required when you
specify the emulation type of mainframe.
Get Command
Status
Async 2E21 9000 The program product is not installed.
CMDRJE Executing 2E21 9001 The program product is not installed.
9-42
Troubleshooting
Command Control Interface User and Reference Guide
To Next Page
Loading...
