raidcom add ldev
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E21 9002 The program product is not installed.
CMDRJE/Get
Command Status
Executing/
Async
2E21 9004 The program product is not installed.
CMDRJE Executing 2E21 900E Compatible Software for IBM® FlashCopy® SE
program product is not installed.
CMDRJE Executing 2E22 0001 LDEV is already defined.
CMDRJE Executing 2E22 000F You cannot create the volume because the size of
the specified external volume group exceeds the
maximum capacity of the external volume for
online data migration.
CMDRJE
Get Command
Status
Executing/
Async
2E23 0001 The number exceeds the maximum number of
LDEV that can be created in the current system
configuration.
Get Command
Status
Async 2E30 0006 The specified LDEV is used in the FICON® Data
Migration.
CMDRJE Executing 2E30 0020 The specified SSID is already used in another CU.
CMDRJE Executing 2E30 0021 The SSID is allocated to the CU already.
Get Command
Status
Async 2E30 0025 The specified volume is used as an alias device in
Compatible PAV.
Get Command
Status
Async 2E30 0026 An LDEV of another emulation type is allocated in
the range where the number is divided into each
32LDEVs.
CMDRJE Executing 2E30 004C The emulation type that cannot be mixed with is
specified.
CMDRJE Executing 2E30 004D The number of ldevs exceeds the maximum
number of ldevs that can be created in the parity
group or the external volume group.
CMDRJE Executing 2E30 0098 The volume which is specified as a pool volume
must have a Data Direct Mapping attribute.
Get Command
Status
Async 2E30 0099 The specified LDEV is a volume for which the Data
Direct Mapping attribute is enabled.
Get Command
Status
Async 2E30 009A The page reservation cannot be set for the
specified LDEV with the specified operation.
Get Command
Status
Async 2E30 009B The operation cannot be performed because the
page reservation is set for the specified LDEV.
CMDRJE Executing 2E30 0104 There is not enough amount of free space that is
specified in the parity group or the external volume
group.
CMDRJE Executing 2E30 0105 The location is out of the range that can be
specified.
Troubleshooting
9-43
Command Control Interface User and Reference Guide
To Next Page
Loading...
