raidcom delete lun
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B958 0233 It cannot be deleted because the operation object
LU is executing host I/O.
CMDRJE Executing B958 0234 It cannot be deleted because the operation object
LU is reserved.
CMDRJE Executing B958 0239 The command device is being used in the local
Command Control Interface.
CMDRJE Executing B958 0240 A command device is being set.
CMDRJE Executing B958 028E It cannot be deleted because of the ALU path
definition.
CMDRJE Executing B958 0304 An LU path or a logical path has been defined.
CMDRJE Executing B958 0404 An LU path or a logical path has been defined.
CMDRJE Executing B958 040F An internal error occurred.
CMDRJE Executing B958 060F The specified LDEV is not installed.
CMDRJE Executing B958 06C0 The specified LDEV is being used as a volume of a
GAD pair.
CMDRJE Executing B958 06C1 The specified LDEV is used as a quorum disk.
CMDRJE Executing B958 06C2 The specified LDEV is used for a TrueCopy pair or a
Universal Replicator pair.
CMDRJE Executing B958 0927 The command cannot be operated because the
virtual LDEV is not defined yet.
CMDRJE Executing B958 0944 The value of LUN exceeds the maximum.
CMDRJE Executing B958 0945 The value of LDEV exceeds the maximum.
CMDRJE Executing B958 0956 The value of host group ID exceeds the maximum.
CMDRJE Executing B958 0957 The program product is not installed.
CMDRJE Executing B958 0959 Host group is not installed.
CMDRJE Executing B958 095D An invalid LDEV exists in the specified LDEVs.
CMDRJE Executing B958 098C Multiple LDEVs cannot be specified.
CMDRJE Executing B958 098D When the host mode option 60 is set, the LU path
of LUN0 cannot be set or released.
CMDRJE Executing B958 0996 The LU path cannot be deleted because the virtual
LDEV ID of the specified volume was deleted.
CMDRJE Executing B958 099F The specified port is not mounted.
CMDRJE Executing B958 09A1 Another LDEV is already mapped in the specified
LUN.
CMDRJE Executing B980 B901 The command was rejected because the specified
port is for NAS Platform (System LU).
9-68
Troubleshooting
Command Control Interface User and Reference Guide
To Next Page
Loading...
