raidcom delete lun
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B980 B902 The command was rejected because the specified
port is for NAS Platform (User LU).
CMDRJE Executing B980 B903 The command was rejected because the selected
resource belongs to NAS_Platform_System_RSG.
Table 9-40 SSB codes returned by raidcom add lun
raidcom add lun
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2EF6 0014 An invalid LDEV exists in the specified LDEVs.
CMDRJE Executing B958 0101 The LU path cannot be set because it is reserved
for Volume Migration.
CMDRJE Executing B958 0107 An internal error occurred.
CMDRJE Executing B958 010C The LU path cannot be set because it is a
deduplication system data volume.
CMDRJE Executing B958 010C The LU path cannot be set because the volume is a
deduplication system data volume.
CMDRJE Executing B958 014A When an ISCSI is used, the LU path cannot be set
in the LDEV other than the OPEN volume.
CMDRJE Executing B958 0150 The attribute of the specified port is Initiator or
External.
CMDRJE Executing B958 0155 The other than HMDE volume or OPEN volume is
included in the specified LDEV.
CMDRJE Executing B958 015A An LU path has already been defined in the target
LDEV.
CMDRJE Executing B958 015D An invalid LDEV exists in the specified LDEVs.
CMDRJE Executing B958 015E It exceeds the maximum LUN under the port.
CMDRJE Executing B958 0178 LDEV is set as a pool volume.
CMDRJE Executing B958 017B The LU path cannot be set because the LDEV is a
system disk.
CMDRJE Executing B958 017C The LU path cannot be set because the LDEV is a
journal volume.
CMDRJE Executing B958 017D The LU path cannot be set because the access
attribute of LDEV Data Retention Utility is reserved.
CMDRJE Executing B958 017E The LU path cannot be set because the access
attribute of LDEV Data Retention Utility is different
from "Read/Write".
Troubleshooting
9-69
Command Control Interface User and Reference Guide
To Next Page
Loading...
