raidcom add lun
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B958 018E The LU path cannot be set because the LDEV has
an ALU attribute.
CMDRJE Executing B958 01A3 When the host mode is Universal Volume
Manager(0x4C), the LU path cannot be set in other
than the external volume.
CMDRJE Executing B958 01C1 The LU path cannot be defined because the volume
is used as a quorum disk.
CMDRJE Executing B958 01DC The number of the host groups which can be set by
ALUA exceeded the maximum.
CMDRJE Executing B958 01DE The operation cannot be performed because the
specified LDEV is the external volume having the
Data Direct Mapping attribute.
CMDRJE Executing B958 01DF The LU path cannot be defined because the LDEV
belongs to the parity group of which accelerated
compression is enabled.
CMDRJE Executing B958 01F2 The host group and the LDEV that configure the LU
path do not exist in the same virtual storage
machine.
CMDRJE Executing B958 01F3 The LU path cannot be defined because the virtual
LDEV information of the specified LDEV is not
defined yet.
CMDRJE Executing B958 01F4 The path of the external volume which has an NDM
attribute cannot be defined
CMDRJE Executing B958 01F9 The LU path cannot be added because the setting
of the T10 PI attribute on the specified port or on
the specified LDEV is not correct.
Enable the T10 PI attribute on the specified port.
Otherwise, disable the T10 PI attribute on the
specified LDEV.
CMDRJE Executing B958 01FA The operation failed because the T10 PI attribute of
the specified LDEV is enabled.
CMDRJE Executing B958 020F The specified LDEV is not installed.
CMDRJE Executing B958 0304 An LU path or a logical path has been defined.
CMDRJE Executing B958 0404 An LU path or a logical path has been defined.
CMDRJE Executing B958 040F An internal error occurred.
CMDRJE Executing B958 0601 The command device cannot be set because it is
reserved for Volume Migration.
CMDRJE Executing B958 0606 The command device cannot be set because it is a
ShadowImage pair or it is reserved.
CMDRJE Executing B958 060F The specified LDEV is not installed.
9-70
Troubleshooting
Command Control Interface User and Reference Guide
To Next Page
Loading...
