raidcom add lun
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B980 B901 The command was rejected because the specified
port is for NAS Platform (System LU).
CMDRJE Executing B980 B902 The command was rejected because the specified
port is for NAS Platform (User LU).
CMDRJE Executing B980 B903 The command was rejected because the selected
resource belongs to NAS_Platform_System_RSG.
CMDRJE Executing B980 B905 The LU path cannot be set in Command Device
because Port is NAS Platform (User LU).
Table 9-41 SSB codes returned by raidcom modify lun
raidcom modify lun
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E11 2206 You do not have the operation authority to operate
the target resource group.
Specify the resource group that is allocated to the
user group as the operation target or set the
operation authority to the user group in order to
operate the target resource group.
CMDRJE Executing B958 5021 The PCB type of the port to which the host group
belongs is out of operation target.
CMDRJE Executing B958 5046 The LU path definition does not exist in the host
group.
CMDRJE Executing B958 5056 The value of host group ID exceeds the maximum.
CMDRJE Executing B958 5059 Host group is not installed.
CMDRJE Executing B958 50DD The specified ALUA path priority is invalid.
CMDRJE Executing B958 50F7 Unavailable to operate because another application
is in progress on Storage Navigator, Device
Manager - Storage Navigator, or SVP.
Table 9-42 SSB codes returned by raidcom discover lun
raidcom discover lun
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 9B01 The specified iSCSI name is invalid.
CMDRJE Executing 2E02 8403 The specified virtual port number is out of range.
9-72
Troubleshooting
Command Control Interface User and Reference Guide
To Next Page
Loading...
