raidcom modify pool
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E11 800F The operation cannot be performed because the
unsupported microcode version exists in the
system.
Get Command
Status
Async 2E11 8010 The storage system is in the internal processing or
the configuration change processes are conflicting.
Get Command
Status
Async 2E11 8105 The cache segment size is incorrect.
Get Command
Status
Async 2E11 8108 The operation cannot be performed because there
is a blocked part in the storage system.
CMDRJE Executing 2E11 9400 The command cannot be accepted. Wait a while,
and then execute the same command.
CMDRJE Executing 2E13 6000 The Dynamic Tiering or active flash operations
cannot be performed to the pool because the
specified pool contains RAID 1 pool VOLs.
CMDRJE Executing 2E13 6002 The specified pool for Dynamic Provisioning cannot
be changed to a pool for Dynamic Tiering because
the pool is related to TSE-VOL.
CMDRJE Executing 2E13 6005 The setting cannot be performed because the
microcode does not support active flash.
CMDRJE Executing 2E13 6007 The operation cannot be performed because the
specified pool is already linked with the virtual
volume of Dynamic Provisioning.
CMDRJE Executing 2E13 6008 The operation cannot be performed because the
pool volume having the Data Direct Mapping
attribute is included in the specified pool.
Get Command
Status
Async 2E13 600A The operation cannot be performed because the
specified pool is linked with an LDEV for which the
deduplication function is enabled.
Get Command
Status
Async 2E13 600B The operation cannot be performed because the
specified pool is linked with an LDEV that has
deduplication data.
Get Command
Status
Async 2E13 600C The operation cannot be performed because the
specified pool is linked with a volume for which
capacity saving function is enabled.
CMDRJE Executing 2E20 6000 Pool ID is not installed.
CMDRJE Executing 2E20 6101 The specified Tier number is invalid.
Get Command
Status
Async 2E20 8300 The specified MP blade or MP unit is not installed.
CMDRJE Executing 2E21 8101 The shared memory for Dynamic Provisioning is
not installed.
CMDRJE Executing 2E21 8102 The shared memory for Dynamic Tiering or active
flash is not installed.
Troubleshooting
9-75
Command Control Interface User and Reference Guide
To Next Page
Loading...
