raidcom add snapshot
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E20 000B The command ends abnormally because an
unmounted volume is specified as the S-VOL of a
Thin Image pair or a Copy-on-Write Snapshot pair.
CMDRJE Executing 2E20 000C The command ends abnormally because the
blocked volume is specified as the S-VOL of a Thin
Image pair or a Copy-on-Write Snapshot pair.
CMDRJE Executing 2E20 000D The command ends abnormally because the
volume in formatting is specified as the S-VOL of a
Thin Image pair or a Copy-on-Write Snapshot pair.
CMDRJE Executing 2E20 0201 When you create a pair with the clone attribute,
you must specify the S-VOL.
CMDRJE Executing 2E21 8107 The command ends abnormally because the shared
memory (FC, TPF, or Extension1) is not added for
necessary capacity or maintenance work is being
performed.
CMDRJE Executing 2E21 8108 The shared memory for Thin Image or Copy-on-
Write Snapshot is not installed.
CMDRJE Executing 2E21 8109 A Thin Image pair or a Copy-on-Write Snapshot
pair cannot be created due to one of the following
reasons:
• The shared memory is not expanded for
necessary capacity.
• It is in the initializing process.
CMDRJE Executing 2E21 810A The shared memory is not installed.
CMDRJE Executing 2E21 9010 The program product is not installed.
CMDRJE Executing 2E21 9306 The virutal LDEV ID for a virtual storage machine is
not defined on the specified LDEV.
CMDRJE Executing 2E21 930A The virtual storage machine with the specified
serial number is not found.
CMDRJE Executing 2E30 000C The specified LDEV is used as a quorum disk.
CMDRJE Executing 2E30 0076 A pair cannot be created because the volume is
already used in the S-VOL of a Thin Image pair or
a Copy-on-Write Snapshot pair is specified as the
P-VOL.
CMDRJE Executing 2E30 0077 A pair cannot be created because the volume is
already used as the P-VOL of a Thin Image pair or
a Copy-on-Write Snapshot pair is specified as the
S-VOL.
CMDRJE Executing 2E30 0078 A pair cannot be created because the volume is
already used as the S-VOL of a Thin Image pair or
a Copy-on-Write Snapshot pair is specified as the
S-VOL.
Troubleshooting
9-91
Command Control Interface User and Reference Guide
To Next Page
Loading...
