raidcom add dp_pool
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
added to the pool with the DP-VOL which is full
allocated.
Get Command
Status
Async 2E31 0015 The RAID level of the specified LDEV is different
with the RAID level of others.
Get Command
Status
Async 2E31 0016 There is a blocked pool volume.
Get Command
Status
Async 2E31 0018 External volumes whose cache modes are different
are included.
CMDRJE Executing 2E31 6001 The POOL Name is duplicated with another pool.
Get Command
Status
Async 2E31 6004 The pool cannot include volumes in different RAID
levels because the pool cannot include those
volumes. Or the pool cannot include the RAID 1
volumes and the volumes of other RAID levels
together.
Get Command
Status
Async 2E31 6005 The pool cannot include both internal volumes and
external volumes because the pool is not set to
Mixable.
Get Command
Status
Async 2E31 9000 The usage capacity exceeds the license capacity of
program product.
CMDRJE Executing 2EE7 00EE The command cannot be accepted. After a while,
execute the same command.
CMDRJE
Get Command
Status
Executing/
Async
2EE7 FEEC An internal error occurred.
Call Hitachi Data Systems customer support.
Get Command
Status
Async 2EE7 FFFF An internal error occurred.
Call Hitachi Data Systems customer support.
CMDRJE Executing B980 B903 The command was rejected because the selected
resource belongs to NAS_Platform_System_RSG.
Table 9-57 SSB codes returned by raidcom modify rcu
raidcom modify rcu
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 3001 CU# of RCU exceed the effective value.
CMDRJE Executing 2E00 3002 The value of least path number is invalid.
CMDRJE Executing 2E00 3003 The value of RIO MIH time is invalid.
CMDRJE Executing 2E00 3004 The value of Round-trip response time is invalid.
CMDRJE Executing 2E00 3005 Invalid product ID or path registration ID.
Troubleshooting
9-117
Command Control Interface User and Reference Guide
To Next Page
Loading...
