raidcom modify rcu
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 3007 Incident that is created by CU is not in the one of
followings.
- Incident that is sent to MCU host and RCU.
- Incident that is sent to RCU.
Get Command
Status
Async 2E00 3008 The command cannot be executed because the
parameter of the specified RCU is invalid.
Get Command
Status
Async 2E00 3009 The command cannot be executed because all the
CU numbers in the RCU is not unified at the path
that is specified creation or deletion.
CMDRJE Executing 2E00 7100 The CU number is out of effective range.
CMDRJE Executing 2E11 8004 The operation cannot be performed because the
microcode is being changed.
CMDRJE Executing 2E20 3000 The serial number, the product ID, or the SSID of
the target storage system is incorrect.
CMDRJE Executing 2E20 3001 The attribute of the RCU cannot be changed
because the specified RCU is not registered.
Get Command
Status
Async 2E21 7101 The specified CU number is not defined, or an
LDEV is not defined under the CU number.
CMDRJE Executing 2E23 3101 The operation cannot be performed because the
number of paths becomes less than the least path
number.
Get Command
Status
Async 2E31 3001 The command cannot be executed because the
RCU identification code of a path is invalid.
CMDRJE Executing 2ED6 00EF An internal error occurred.
Call Hitachi Data Systems customer support.
CMDRJE Executing 2ED6 3300 The value of SSID for the remote storage system is
invalid.
Table 9-58 SSB codes returned by raidcom delete rcu_path
raidcom delete rcu_path
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 3001 The CU# of RCU exceeds the effective value.
CMDRJE Executing 2E00 3005 The product ID or the path registration ID is
invalid.
Get Command
Status
Async 2E00 3008 The command cannot be executed because the
parameter of the specified RCU is invalid.
CMDRJE Executing 2E00 3200 The specified port # on the side of RCU is invalid.
9-118
Troubleshooting
Command Control Interface User and Reference Guide
To Next Page
Loading...
