raidcom modify port -ipv4_subnetmask
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B955 120E The command cannot be executed because the
iSCSI virtual port mode is ON.
Table 9-74 SSB codes returned by raidcom modify port -ipv4_gateway_address
raidcom modify port -ipv4_gateway_address
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B955 1039 The command device being used at the local CCI
exists under the port.
CMDRJE Executing B955 120E The command cannot be executed because the
iSCSI virtual port mode is ON.
Table 9-75 SSB codes returned by raidcom modify port -ipv6_gateway_address
raidcom modify port -ipv6_gateway_address
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B955 1039 The command device being used at the local CCI
exists under the port.
CMDRJE Executing B955 10B9 The multicast address or the loop-back address
cannot be set as the default gateway for IPv6.
CMDRJE Executing B955 10C9 The same IPv6 address cannot be set to the same
port redundantly.
CMDRJE Executing B955 120E The command cannot be executed because the
iSCSI virtual port mode is ON.
Table 9-76 SSB codes returned by raidcom modify port -ipv6_global_address
raidcom modify port -ipv6_global_address
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B955 1039 The command device being used at the local CCI
exists under the port.
CMDRJE Executing B955 10B8 The multicast address or the loop-back address
cannot be set as global address 1 for IPv6.
CMDRJE Executing B955 10C9 The same IPv6 address cannot be set to the same
port redundantly.
Troubleshooting
9-135
Command Control Interface User and Reference Guide
To Next Page
Loading...
