raidcom modify port -delete_vlan_id
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B955 120E The command cannot be executed because the
iSCSI virtual port mode is ON.
Table 9-89 SSB codes returned by raidcom modify port -modify_vlan_id
raidcom modify port -modify_vlan_id
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B955 1039 The command device being used at the local CCI
exists under the port.
CMDRJE Executing B955 10B2 The invalid value is specified for the VLAN ID.
CMDRJE Executing B955 10CD The command cannot be executed because the
specified VLAN ID is already used.
CMDRJE Executing B955 120E The command cannot be executed because the
iSCSI virtual port mode is ON.
Table 9-90 SSB codes returned by raidcom modify port -vlan_tagging_mode
raidcom modify port -vlan_tagging_mode
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B955 1039 The command device being used at the local CCI
exists under the port.
CMDRJE Executing B955 10BF The VLAN tagging mode cannot be set because the
VLAN ID has not been entered yet.
CMDRJE Executing B955 120E The command cannot be executed because the
iSCSI virtual port mode is ON.
Table 9-91 SSB codes returned by raidcom modify port -window_size
raidcom modify port -window_size
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B955 1039 The command device being used at the local CCI
exists under the port.
CMDRJE Executing B955 120E The command cannot be executed because the
iSCSI virtual port mode is ON.
9-140
Troubleshooting
Command Control Interface User and Reference Guide
To Next Page
Loading...
