raidcom modify spm_ldev
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E22 9B04 The iSCSI name cannot be registered because the
number of iSCSI names that can be registered in
the system exceeded the maximum number.
CMDRJE Executing 2E3F 8000 The specified operation is not supported in the
current microcode version.
CMDRJE Executing B9D3 B9D0 The operation cannot be performed because it is
locked in another session. Perform the operation
again.
CMDRJE Executing B9D3 B9D1 The Server Priority Manager information for the
port WWN already exists in the system.
CMDRJE Executing B9D3 B9D2 The LDEV cannot be registered because the
number of LDEVs that can be registered in the
system exceeded the maximum number.
CMDRJE Executing B9D3 B9D3 The WWN cannot be registered because the
number of WWNs that can be registered in the
system exceeded the maximum number.
CMDRJE Executing B9D3 B9D4 The WWN cannot be registered because the
number of WWNs that can be registered in the
LDEV exceeded the maximum number.
CMDRJE Executing B9D3 B9D5 The specified LDEV is not defined.
CMDRJE Executing B9D3 B9D7 Server Priority Manager is being used by Storage
Navigator or Device Manager - Storage Navigator.
CMDRJE Executing B9D3 B9D8 The iSCSI name cannot be registered because an
invalid WWN is registered. Invalid WWNs are
WWNs which are not in the WWN format defined
by IEEE. See Cautions about using Server Priority
Manager on page 5-63 for details.
CMDRJE Executing B9D3 B9D9 The specified operation cannot be performed
because of no iSCSI package.
CMDRJE Executing B9D7 B9D7 The specified WWN, iSCSI name, or upper limit is
incorrect.
CMDRJE Executing B9D8 B9D8 The specified LDEV does not have the WWN or
iSCSI name.
CMDRJE Executing B9D9 B9D9 The Server Priority Manager program product is
not installed.
9-168
Troubleshooting
Command Control Interface User and Reference Guide
To Next Page
Loading...
