Table 9-124 SSB codes returned by raidcom delete spm_ldev
raidcom delete spm_ldev
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 9B01 The specified iSCSI name is incorrect.
CMDRJE Executing 2E11 9400 The command cannot be accepted. After a while,
execute the same command.
CMDRJE Executing 2E3F 8000 The specified operation is not supported in the
current microcode version.
CMDRJE Executing B9D3 B9D0 The operation cannot be performed because it is
locked in another session. Perform the operation
again.
CMDRJE Executing B9D3 B9D9 The specified operation cannot be performed
because of no iSCSI package.
CMDRJE Executing B9D7 B9D7 The specified WWN or iSCSI name is incorrect.
CMDRJE Executing B9D8 B9D8 The specified LDEV does not have the WWN or
iSCSI name.
Table 9-125 SSB codes returned by raidcom monitor spm_ldev
raidcom monitor spm_ldev
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 9B01 The specified iSCSI name is incorrect.
CMDRJE Executing 2E11 9400 The command cannot be accepted. After a while,
execute the same command.
CMDRJE Executing 2E3F 8000 The specified operation is not supported in the
current microcode version.
CMDRJE Executing B9D3 B9D0 The operation cannot be performed because it is
locked in another session. Perform the operation
again.
CMDRJE Executing B9D7 B9D7 The specified WWN or iSCSI name is incorrect.
Table 9-126 SSB codes returned by raidcom get spm_ldev
raidcom get spm_ldev
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 9B01 The specified iSCSI name is incorrect.
Troubleshooting
9-169
Command Control Interface User and Reference Guide
To Next Page
Loading...
