Hitachi HUS VM - Page 494

raidcom get spm_ldev
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E11 9400 The command cannot be accepted. After a while,
execute the same command.
CMDRJE Executing 2E3F 8000 The specified operation is not supported in the
current microcode version.
CMDRJE Executing B9D3 B9D0 The operation cannot be performed because it is
locked in another session. Perform the operation
again.
CMDRJE Executing B9D7 B9D7 The specified WWN or iSCSI name is incorrect.
Table 9-127 SSB codes returned by raidcom modify ldev -capacity_saving/-
capacity_saving_mode
raidcom modify ldev -capacity_saving/-capacity_saving_mode
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 0000 The LDEV number is out of the valid range.
Get Command
Status
Async 2E00 0013 The operation cannot be performed because there
are not enough cache management devices.
Get Command
Status
Async 2E10 002D The operation cannot be performed because the
specified LDEV is a journal volume.
Get Command
Status
Async 2E10 0207 The specified LDEV cannot be operated because it
is a Universal Replicator P-VOL and is being
copied.
Get Command
Status
Async 2E10 0208 The specified LDEV cannot be operated because its
pages are being released.
Get Command
Status
Async 2E10 020B The specified LDEV cannot be operated because
the deduplication function is enabled.
Get Command
Status
Async 2E10 020C The specified LDEV cannot be operated because
deduplicated data exists.
Get Command
Status
Async 2E10 020D The specified LDEV cannot be operated because it
is in the status where the capacity saving setting
cannot be disabled.
Get Command
Status
Async 2E10 020E The specified LDEV is not in the status where the
capacity saving setting can be enabled.
Get Command
Status
Async 2E10 020F The specified LDEV is not in the status where the
capacity saving setting can be changed.
Get Command
Status
Async 2E10 0214 The operation cannot be performed because the
specified volume is being used by Volume
Migration.
9-170
Troubleshooting
Command Control Interface User and Reference Guide