raidcom modify ldev -capacity_saving/-capacity_saving_mode
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
Get Command
Status
Async 2E10 0215 The operation cannot be performed because the
specified volume is being used by Quick Restore of
ShadowImage.
Get Command
Status
Async 2E10 0219 The tiering policy is enabled for the specified
LDEV.
Get Command
Status
Async 2E10 6020 The deduplication function cannot be used in the
pool linked with the specified LDEV.
Get Command
Status
Async 2E10 6022 The operation cannot be performed because the
deduplication system data volume of the pool
linked with the specified LDEV is blocked.
Get Command
Status
Async 2E10 6026 The specified virtual volume cannot be operated
because the used capacity of the pool associated
with the specified virtual volume exceeds the
depletion threshold.
Get Command
Status
Async 2E11 001B The specified LDEV is blocked.
Get Command
Status
Async 2E11 0209 The operation cannot be performed due to a cache
memory failure or maintenance work being
performed.
Get Command
Status
Async 2E11 6008 The operation cannot be performed because the
pool linked with the specified LDEV is in unusable
status.
CMDRJE Executing 2E11 9400 The command cannot be accepted. Wait a while,
and issue the same command.
CMDRJE
Get Command
Status
Executing/
Async
2E20 0000 The specified LDEV is not installed.
Get Command
Status
Async 2E21 8103 The operation cannot be performed because the
capacity of shared memory is insufficient.
Get Command
Status
Async 2E21 810A The shared memory is not installed.
Get Command
Status
Async 2E21 9000 The program product is not installed.
Get Command
Status
Async 2E30 0086 The operation cannot be performed because the
specified volume is not a DP-VOL.
Get Command
Status
Async 2E30 0099 The specified LDEV is set that the Data Direct
Mapping attribute is enabled.
Get Command
Status
Async 2E30 009B The operation cannot be performed because the
page reservation is set for the specified LDEV.
Get Command
Status
Async 2E30 0206 The operation cannot be performed because the
specified LDEV is a deduplication system data
volume.
Troubleshooting
9-171
Command Control Interface User and Reference Guide
To Next Page
Loading...
