Hitachi HUS VM - Page 497

raidcom replace quorum
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E30 0005 Cache Residency Manager is set to the specified
volume.
CMDRJE Executing 2E30 0007 A path is defined to the specified volume.
CMDRJE Executing 2E30 000E The specified LDEV is used as a pool volume.
CMDRJE Executing 2E30 000F The specified LDEV is used as a journal volume.
CMDRJE Executing 2E30 0010 The specified volume is used as a command
device.
CMDRJE Executing 2E30 004E Data Retention Utility is set to the specified
volume.
CMDRJE Executing 2E30 0074 The specified LDEV cannot be operated because it
is an external volume mapped for online data
migration.
CMDRJE Executing 2E30 008E The emulation type of the specified LDEV is not
OPEN-V.
CMDRJE Executing 2E30 0092 The specified LDEV cannot be used because the
size of the LDEV is less than the minimum capacity
of the quorum disk.
CMDRJE Executing 2E30 0099 The specified LDEV is a volume of which Data
Direct Mapping attribute is enabled.
CMDRJE Executing 2EB9 FEEC An internal error occurred. Contact Hitachi Data
Systems customer support.
Table 9-129 SSB codes returned by raidcom modify quorum
raidcom modify quorum
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 A001 The specified quorum disk ID is out of the valid
range.
CMDRJE Executing 2E00 A002 The specified value for Read Response Guaranteed
Time When Quorum Disk Blocked is not in the valid
range.
CMDRJE Executing 2E20 A001 The specified quorum disk is not defined.
CMDRJE Executing 2EE8 FEEC An internal error occurred.
CMDRJE Executing 2EF3 9F02 The specified operation cannot be performed
because it is not supported.
Troubleshooting
9-173
Command Control Interface User and Reference Guide