Table 9-130 SSB codes returned by raidcom add hba_iscsi
raidcom add hba_iscsi
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B957 404F The program product is not installed.
CMDRJE Executing B957 408F The specified command is not supported for the FC
port.
CMDRJE Executing B957 40FD The attribute of the specified port is Initiator or
External.
CMDRJE Executing B957 44E0 The invalid character or the invalid number of
characters is specified for the initiator iSCSI name.
CMDRJE Executing B957 44E4 The specified iSCSI target is not registered.
CMDRJE Executing B957 44E7 The iSCSI name cannot be added because the
number of iSCSI names that can be used for this
port has already reached the maximum value.
CMDRJE Executing B980 B901 The command was rejected because the specified
port is for NAS platform (System LU).
CMDRJE Executing B980 B902 The command was rejected because the specified
port is for NAS platform (User LU).
Table 9-131 SSB codes returned by raidcom delete hba_iscsi
raidcom delete hba_iscsi
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B957 404F The program product is not installed.
CMDRJE Executing B957 408F The specified command is not supported for the FC
port.
CMDRJE Executing B957 40FD The attribute of the specified port is Initiator or
External.
CMDRJE Executing B957 44E0 The invalid character or the invalid number of
characters is specified for the initiator iSCSI name.
CMDRJE Executing B957 44E4 The specified iSCSI target is not registered.
CMDRJE Executing B980 B901 The command was rejected because the specified
port is for NAS platform (System LU).
CMDRJE Executing B980 B902 The command was rejected because the specified
port is for NAS platform (User LU).
9-174
Troubleshooting
Command Control Interface User and Reference Guide
To Next Page
Loading...
