Table 9-132 SSB codes returned by raidcom set hba_iscsi
raidcom set hba_iscsi
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B957 404F The program product is not installed.
CMDRJE Executing B957 408F The specified command is not supported for the FC
port.
CMDRJE Executing B957 40FD The attribute of the specified port is Initiator or
External.
CMDRJE Executing B957 45E0 The character or the number of characters that
cannot be specified for the initiator iSCSI name is
specified.
CMDRJE Executing B957 45E2 The character or the number of characters that
cannot be specified for the initiator iSCSI nickname
is specified.
CMDRJE Executing B957 45E3 The specified iSCSI name is not registered.
CMDRJE Executing B980 B901 The command was rejected because the specified
port is for NAS platform (System LU).
CMDRJE Executing B980 B902 The command was rejected because the specified
port is for NAS platform (User LU).
Table 9-133 SSB codes returned by raidcom reset hba_iscsi
raidcom reset hba_iscsi
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B980 B901 The command was rejected because the specified
port is for NAS platform (System LU).
CMDRJE Executing B980 B902 The command was rejected because the specified
port is for NAS platform (User LU).
Table 9-134 SSB codes returned by raidcom add chap_user
raidcom add chap_user
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B957 404F The program product is not installed.
CMDRJE Executing B957 408F The specified command is not supported for the FC
port.
CMDRJE Executing B957 40FD The attribute of the specified port is Initiator or
External.
Troubleshooting
9-175
Command Control Interface User and Reference Guide
To Next Page
Loading...
