raidcom add chap_user
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B957 46E4 The specified iSCSI target is not registered.
CMDRJE Executing B957 46E8 The character used for the user ID, or the number
of characters is invalid.
CMDRJE Executing B957 46EB The specified CHAP user name is already used for
the same port.
CMDRJE Executing B957 46EF The CHAP user ID cannot be added because the
number of CHAP user IDs that can be set for this
port has already reached the maximum value.
CMDRJE Executing B980 B901 The command was rejected because the specified
port is for NAS platform (System LU).
CMDRJE Executing B980 B902 The command was rejected because the specified
port is for NAS platform (User LU).
Table 9-135 SSB codes returned by raidcom delete chap_user
raidcom delete chap_user
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B957 404F The program product is not installed.
CMDRJE Executing B957 408F The specified command is not supported for the FC
port.
CMDRJE Executing B957 40FD The attribute of the specified port is Initiator or
External.
CMDRJE Executing B957 46E4 The specified iSCSI target is not registered.
CMDRJE Executing B957 46E8 The character used for the user ID, or the number
of characters is invalid.
CMDRJE Executing B957 46EC The specified CHAP user name is not registered.
CMDRJE Executing B980 B901 The command was rejected because the specified
port is for NAS platform (System LU).
CMDRJE Executing B980 B902 The command was rejected because the specified
port is for NAS platform (User LU).
Table 9-136 SSB codes returned by raidcom set chap_user
raidcom set chap_user
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B957 404F The program product is not installed.
9-176
Troubleshooting
Command Control Interface User and Reference Guide
To Next Page
Loading...
