Hitachi HUS VM - Page 501

raidcom set chap_user
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B957 408F The specified command is not supported for the FC
port.
CMDRJE Executing B957 40FD The attribute of the specified port is Initiator or
External.
CMDRJE Executing B957 47E4 The specified iSCSI target is not registered.
CMDRJE Executing B957 47E8 The character used for the user ID, or the number
of characters is invalid.
CMDRJE Executing B957 47EA The specified password for CHAP authentication is
incorrect.
CMDRJE Executing B957 47EC The specified CHAP user name is not registered.
CMDRJE Executing B957 47EE The iSCSI target cannot be set because the user
authentication of the iSCSI target is invalid.
CMDRJE Executing B980 B901 The command was rejected because the specified
port is for NAS platform (System LU).
CMDRJE Executing B980 B902 The command was rejected because the specified
port is for NAS platform (User LU).
Table 9-137 SSB codes returned by raidcom reset chap_user
raidcom reset chap_user
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B957 404F The program product is not installed.
CMDRJE Executing B957 408F The specified command is not supported for the FC
port.
CMDRJE Executing B957 40FD The attribute of the specified port is Initiator or
External.
CMDRJE Executing B957 47E4 The specified iSCSI target is not registered.
CMDRJE Executing B957 47E8 The character used for the user ID, or the number
of characters is invalid.
CMDRJE Executing B957 47EC The specified CHAP user name is not registered.
CMDRJE Executing B957 47EE The iSCSI target cannot be set because the user
authentication of the iSCSI target is invalid.
CMDRJE Executing B980 B901 The command was rejected because the specified
port is for NAS platform (System LU).
CMDRJE Executing B980 B902 The command was rejected because the specified
port is for NAS platform (User LU).
Troubleshooting
9-177
Command Control Interface User and Reference Guide