Hitachi HUS VM - Page 504

raidcom add external_iscsi_name
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E22 9B02 The total number of registered iSCSI target and
RCU port in the storage system reached the
maximum.
CMDRJE Executing 2E22 9B03 The total number of registered iSCSI targets and
RCU ports per port reached the maximum.
CMDRJE Executing 2E30 8400 The port attribute is not External (ELUN).
CMDRJE Executing 2E31 8301 The specified port is not a port of the package for
iSCSI.
Table 9-142 SSB codes returned by raidcom check external_iscsi_name
raidcom check external_iscsi_name
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E02 8403 The specified virtual port number is out of range.
CMDRJE Executing 2E10 8404 The iSCSI virtual port mode for the specified port
is disabled.
CMDRJE Executing 2E20 8401 The specified virtual port is not defined.
CMDRJE Executing 2E20 9B01 The specified iSCSI target is not registered.
Table 9-143 SSB codes returned by raidcom delete external_iscsi_name
raidcom delete external_iscsi_name
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E02 8403 The specified virtual port number is out of range.
CMDRJE Executing 2E10 8404 The iSCSI virtual port mode for the specified port
is disabled.
CMDRJE Executing 2E20 8401 The specified virtual port is not defined.
CMDRJE Executing 2E20 9B01 The specified iSCSI target is not registered.
CMDRJE Executing 2E11 4304 The operation cannot be performed because the
specified iSCSI target is defined to the external
path.
9-180
Troubleshooting
Command Control Interface User and Reference Guide