Hitachi HUS VM - Page 503

raidcom add rcu_iscsi_port
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B980 B901 The command was rejected because the specified
port is for NAS Platform (System LU).
CMDRJE Executing B980 B902 The command was rejected because the specified
port is for NAS Platform (User LU).
Table 9-140 SSB codes returned by raidcom delete rcu_iscsi_port
raidcom delete rcu_iscsi_port
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E20 3000 The serial number, product ID, or SSID of the
target storage system is incorrect.
CMDRJE Executing 2E20 3201 The specified RCU port is not registered.
CMDRJE Executing 2E21 3201 Deletion cannot be executed because the RCU path
is defined.
CMDRJE Executing B980 B901 The command was rejected because the specified
port is for NAS Platform (System LU).
CMDRJE Executing B980 B902 The command was rejected because the specified
port is for NAS Platform (User LU).
Table 9-141 SSB codes returned by raidcom add external_iscsi_name
raidcom add external_iscsi_name
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 9B01 The specified iSCSI name is invalid.
CMDRJE Executing 2E02 8403 The specified virtual port number is out of range.
CMDRJE Executing 2E02 9C01 The specified IP address is invalid.
CMDRJE Executing 2E10 8404 The iSCSI virtual port mode for the specified port
is disabled.
CMDRJE Executing 2E20 8401 The specified virtual port is not defined.
CMDRJE Executing 2E21 810A The shared memory is not installed.
CMDRJE Executing 2E22 8401 The specified target information is registered for
another virtual port under the specified physical
port.
CMDRJE Executing 2E22 9B01 The specified iSCSI target is already registered.
Troubleshooting
9-179
Command Control Interface User and Reference Guide