raidcom modify initiator_chap_user
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E11 4305 The operation cannot be performed because the
specified port is defined to the external path.
CMDRJE Executing 2E21 810A The shared memory is not installed.
CMDRJE Executing 2E31 8301 The specified port is not a port of the package for
iSCSI.
Table 9-147 SSB codes returned by raidcom initialize parity_grp
raidcom initialize parity_grp
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 0101 The parity group number is not in the effective
range.
CMDRJE Executing 2E00 0102 The operation cannot be performed because it is
not a parity group.
Get Command
Status
Async 2E10 0000 LDEV is used as a ShadowImage pair volume.
Get Command
Status
Async 2E10 0001 LDEV is used as a TrueCopy pair volume or
Universal Replicator pair volume.
Get Command
Status
Async 2E10 0003 LDEV is used as a Compatible FlashCopy® V2
relationship.
Get Command
Status
Async 2E10 0004 LDEV is used as a Thin Image pair volume or a
Copy-on-Write Snapshot pair volume.
Get Command
Status
Async 2E10 0008 LDEV is used as a system disk.
Get Command
Status
Async 2E10 0010 LDEV is not blocked.
Get Command
Status
Async 2E10 0062 LDEV is used as the primary volume of a global-
active device (GAD) pair.
Get Command
Status
Async 2E10 0063 LDEV is used as the secondary volume of a global-
active device (GAD) pair.
Get Command
Status
Async 2E10 0100 The formatting operation cannot be performed
because the encryption value of the key number
that is set to encryption ECC is invalid.
Get Command
Status
Async 2E10 0101 The formatting operation cannot be performed
because the checksum of the encryption key does
not match.
Get Command
Status
Async 2E10 0210 The operation cannot be performed because the
capacity saving status of LDEV is Failed.
9-182
Troubleshooting
Command Control Interface User and Reference Guide
To Next Page
Loading...
