raidcom initialize parity_grp
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
Get Command
Status
Async 2E10 6022 The operation cannot be performed because the
deduplication system data volume of the pool
linked with an LDEV is blocked.
Get Command
Status
Async 2E11 0007 LDEV is in shredding.
Get Command
Status
Async 2E11 0009 The operation cannot be performed because LDEV
is now expanding.
Get Command
Status
Async 2E11 001E The operation cannot be performed because the
virtual disk space is blocked.
Get Command
Status
Async 2E11 010A The target parity group is in the state of correction
copy.
Get Command
Status
Async 2E11 6004 The operation of Dynamic Provisioning V-VOL
cannot be performed because there is a blocked
pool.
Get Command
Status
Async 2E11 6006 The operation of Dynamic Provisioning V-VOL
cannot be performed because there is a blocked
pool volume.
Get Command
Status
Async 2E11 8004 The operation cannot be performed because the
internal processing is in progress.
Get Command
Status
Async 2E11 8010 The operation cannot be performed because the
internal processing is in progress.
CMDRJE Executing 2E11 9400 The command cannot be accepted. After a while,
execute the same command.
CMDRJE
Get Command
Status
Executing
Async
2E13 0102 The operation cannot be performed because there
is no LDEV in the parity group.
Get Command
Status
Async 2E14 0000 The processing stopped because aborting
processing is required.
Get Command
Status
Async 2E20 0000 LDEV is not installed.
CMDRJE
Get Command
Status
Executing
Async
2E20 0100 There is no parity group.
Get Command
Status
Async 2E30 000A LDEV is used as a Dynamic Provisioning.
Get Command
Status
Async 2E30 000C LDEV is used as a quorum disk.
Get Command
Status
Async 2E30 000E LDEV is used as a pool volume.
Get Command
Status
Async 2E30 000F LDEV is used as a journal volume.
Troubleshooting
9-183
Command Control Interface User and Reference Guide
To Next Page
Loading...
